A turnkey CEMS for every stack on your site, installation, calibration, and direct KLHK submission. Your operators see what the regulator sees, in the same minute.
Under PermenLHK No. 13/2021, every industrial stack must report sub-hourly emission data to KLHK through SISPEK, or face penalties up to criminal prosecution. Yet most Indonesian factories still rely on quarterly manual sampling and spreadsheet uploads.
"The regulator sees a monthly summary. Your operators should see every minute."
SISPEK (Sistem Informasi Pemantauan Emisi Industri secara Kontinu) is the Indonesian government's continuous emission reporting framework. Every stack that falls under PermenLHK No. 13/2021 must stream sub-hourly readings to KLHK, gas concentrations, opacity, flow, temperature, oxygen, all tied to a registered identity.
MUSA's CEMS program handles the full chain. We size the analyser package against your fuel mix and combustion profile, install in-stack and extractive systems with a shelter, run RATA/CGA calibration, and connect the certified data feed to SISPEK. From day one your operators have the same view as the auditor, minus the lag.
The same telemetry feeds MUSA View, so emission performance sits next to throughput, energy and process variables. The annual environmental report writes itself.
Sulfur dioxide, primary indicator of fuel sulfur content and scrubber performance.
Nitrogen oxides, combustion temperature indicator; regulated under most kmenlhk.
PM mass concentration, in-stack or extractive, for all fuel types.
Stack gas velocity, required alongside concentration for mass emission rate.
Oxygen reference, normalises all concentrations to standard conditions.
Stack gas temperature, required for volumetric correction and compliance.
Visible smoke opacity, transmitted light measurement per US EPA Method 9 equivalent.
Carbon monoxide and dioxide, combustion efficiency indicators; CO₂ for carbon reporting.
Direct feed to KLHK. No spreadsheets, no manual upload, no missed windows.
1-minute granularity for operators, regulator-cadence rollups for KLHK.
Every raw reading retained ≥ 5 years with calibration metadata attached.
Be warned in minutes, not after the regulator's monthly review.
Analyser drift, blower faults and probe blockages flagged before they invalidate data.
A kawasan operator can supervise every tenant stack from a single MUSA View tenant.
In-stack and extractive configurations for SO₂, NOₓ, CO, CO₂, O₂, particulate matter, opacity, flow and temperature. Matched to your fuel and load profile.
Edge logger pushes the certified data stream to KLHK on the regulator's cadence. Submission status visible to your team in real time, every send, every retry.
Every stack rendered as a card: emission concentration vs limit, trend, last calibration, last submission, and a 24-hour timeseries. Drill into any reading for the raw analyser frame and the conditioning state at that moment.
Relative Accuracy Test Audit (RATA) and Calibration Gas Audit (CGA) workflows built into the platform. Schedule audits, track gas certificates, and maintain the QAL2 chain of custody, all from the same console as your daily operations.
Continuous Emission Monitoring is mandatory for all industrial stacks above the throughput threshold. Non-compliance carries administrative sanctions and potential criminal liability.
External calibration must be performed by a KAN-accredited laboratory. Our workflow schedules and tracks these audits automatically.
All CEMS data must be retained for a minimum of 3 years with full calibration metadata. MUSA archives ≥ 5 years by default.
10-point operations &: maintenance checklist, responsible party, QA/QC docs, spare parts stock, internal audit, and more. We help you meet every item.
Stack inventory, fuel/load profile, regulatory baseline. Site walk and feasibility note. Output: deployment blueprint with budget.
Analyser selection matched to fuel type, shelter design, sample line routing. Procurement and Factory Acceptance Test.
Mechanical, electrical, communications. RATA, drift checks, SISPEK registration on the KLHK portal. Go-live sign-off.
Live data, automated submissions, scheduled maintenance, KPI reviews. Quarterly calibration audits and annual compliance reconciliation included.
Coal, gas, geothermal
Flare, heater, furnace
Kiln, raw mill, coal mill
Process heater, boiler
Recovery boiler, lime kiln
Kawasan · multi-tenant
Real-time water quality at every discharge outfall. COD, BOD, TSS, pH, flow.
ExploreThree-stage program: dispersion study, AQMS, and Digital Twin for your estate.
ExploreScope 1, 2 and 3 GHG inventory from actual telemetry, not spreadsheets.
Explore
